BCJKM - LUPERCO AST
- MSDS: BCJKM
- Manufacturer: LUCIDOL DIV PENNWALT CORP
- Product Name: LUPERCO AST
- National Stock Number: 6850-00N003076
Product Identification
Product ID:LUPERCO AST
MSDS Date:01/01/1985
FSC:6850
NIIN:00N003076
MSDS Number: BCJKM
Responsible Party
BUFFALO, NY 14240
US
Cage: HO073
Contractor
Telephone: 716-877-1740
Cage: 75675
Ingredients
BENZOYL PEROXIDE
CAS: 94-36-0
RTECS: DM8575000
ACGIH TLV: 5MG/CUM
SILICONE OIL
Hazards
Effects of Overexposure:MFR STATES NOT ESTABLISHED IN PASTE MATERIAL.
First Aid
First Aid:EYES: IMMEDIATELY FLUSH WITH WATER FOR 15 MIN. GET MEDICAL
ATTENTION. SKIN: WASH WITH SOAP AND WATER.
Fire Fighting
Extinguishing Media:WATER,SPRAY, DRY CHEMICAL, FOAM
Fire Fighting Procedures:IF LG AMOUNT: EVACUATE AREA. COOL SURROUNDING
MTRL W/ WATER.
Unusual Fire/Explosion Hazard:HEAVY SMOKE MAY BE EVOLVED,IF INVOLVED IN
A FIRE.
Accidental Release
Spill Release Procedures:ABSORB W/ SAND OR INERT MATERIAL SUCH AS
VERMICULITE OR PERLITE. SWEEP OR SCOOP UP AND REMOVE WITH
NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:STORE AWAY FROM HEAT AND SOURCES OF
IGNITION. STORE BELOW 100F; 38C.
Other Precautions:EMPTY CONTAINERS MAY CONTAIN HAZARDOUS RESIDUES. DO
NOT RE-USE CONTAINERS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPRVD RESPIRATOR,IF REQUIRED.
Ventilation:MFR STATES USE ADEQUATE VENT.
Protective Gloves:SEE OTHER EQUIP
Eye Protection:GOG/SAFETY GLASSES
Other Protective Equipment:GLOVES: NEOPRENE,NATURAL & BUTYL
RUBBER,POLYETHYLENE.
Supplemental Safety and Health
INCOMPATIBILITY: AMINES, POLYMERIZATION ACCELERATORS.
Chemical Properties
Spec Gravity:1.04
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE PASTE
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS,STRONG ALKALIS,STRONG OXIDIZERS.(SEE SUPP DATA)
Stability Condition to Avoid:THERMAL DECOMP, CONTAMINATION, IGNITION
SOURCES.
Hazardous Decomposition Products:DECOMPOSITION PRODUCTS ARE FLAMMABLE.
Disposal
Waste Disposal Methods:MFR RECOMMENDS TO DISPUSE OF IMMEDIATELY.
DISPOSAL METHOD MUST BE IAW FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.